积分426
回帖0
精华
在线时间 小时
最后登录1970-1-1
注册时间2005-3-27
|
同时发布的还有2010款1090RR:
ENGINE
Type
Four cylinder, 4 stroke, 16 valve
Timing system
“D.O.H.C”, radial valve
Total displacement
1078cm3 (65.78cu.in.)
Compression ratio
13:1
Starting
Electric
Bore x stroke
79 mm x 55 mm (3.1 in. x 2.2 in. )
Max. horse power - r.p.m. (at the crankshaft)
Full power version: 106 kW (144.2 HP) at 10600 / Restricted power version: 73 kW (100 HP) at 8000 Lim. 11650 r.p.m.
Max. torque - r.p.m.
Full power version: 115 Nm (11.5 kgm) at 8000 r.p.m. / Restricted power version: 93 Nm (9.3 kgm) at 6600 r.p.m.
Cooling system
Cooling with separated liquid and oil radiators
Engine management system
Magneti Marelli 5SM ignition - injection integrated system with Mikuni throttle body; induction discharge electronic ignition; sequential timed “Multipoint” electronic injection
Clutch
Wet, multi - disc with mechanical anti-surging device
Gear Box
Cassette gearbox; six speed, constant mesh
Primary drive
50/79
Gear ratio
First gear: Speed*
13/38
109.7 km/h (68.1 mph) at 11650 r.p.m.
Second gear: Speed*
16/34
150.8 km/h (93.6 mph) at 11650 r.p.m.
Third gear: Speed*
18/32
180.3 km/h (111.9 mph) at 11650 r.p.m.
Fourth gear: Speed*
20/30
213.7 km/h (132.7 mph) at 11650 r.p.m.
Fifth gear: Speed*
22/29
243.2 km/h (151.0 mph) at 11650 r.p.m.
Sixth gear: Speed*
19/23
265.0 km/h (164.5 mph) at 11650 r.p.m.
Final velocity ratio
15x41
ELECTRICAL EQUIPMENT
Voltage
12 V
Alternator
350 W at 5000 r.p.m.
Battery
12 V - 8.6 Ah
DIMENSIONS AND WEIGHT
Wheelbase
1438 mm (56.61 in.)
Overall lenght
2093 mm (82.36 in.)
Overall width
760 mm (29.92 in.)
Saddle height
830 mm (32.68 in.)
Min. ground clearance
150 mm (5.91 in.)
Trail
103,5 mm (4.07 in.)
Dry weight
190 Kg (418.9 lbs)
Fuel tank capacity
23 l (6.07 U.S. gal.)
PERFORMANCE
Maximum speed*
Full power version: 265.0 km/h (164.5 mph) / Restricted power version: 245,0 km/h (152 mph)
FRAME
Type
CrMo Steel tubular trellis (TIG welded)
Rear swing arm pivot plates: material
Aluminium alloy
FRONT SUSPENSION
Type
“UPSIDE - DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Rod dia.
50 mm (1.97 in.)
Travel on leg axis
130 mm (5.11 in.)
REAR SUSPENSION
Type
Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload adjustment
Single sided swing arm: materiale
Aluminium alloy
Wheel travel
120 mm (4.72 in.)
BRAKE
Front brake
Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking band and aluminium flange
Front brake caliper
Radial-type, single-piece with 4 pistons - Ø 34 mm (Ø 1.34 in.)
Rear brake
Single steel disc with Ø 210 mm (Ø 8.27 in.) diameter
Rear brake caliper
With 4 pistons - Ø 25,4 mm (Ø 1.00 in.)
RIM
Front: Material / size
Forged aluminium alloy 3.50 ” x 17 ”
Rear: Material / size
Forged aluminium alloy 6.00 ” x 17 ”
TYRES
Front
120/70 - ZR 17 M/C (58 W)
Rear
190/55 - ZR 17 M/C (75 W)
FAIRING
Material
Thermoplastic |
|